Specs:

Manufacturer: ABRITES

The Full Mercedes-Benz cars package includes the MN030, MN032, MN033, MN034 and MN035 licenses. Below you can see what each one of them covers as functionalities.

MN035 VGS4-NAG2 FBS4 virgin/personalization via ABPROG license is dedicated to work with VGS4-NAG2 7G-Tronic TCU of the FBS4/DAS4 generation.

Functionalities:

• Read FBS4 data from VGS4-NAG2 modules with the help of ABPROG
• Set VGS4-NAG2 modules to virgin state using ABPROG
• Write FBS4 personalization data to the TCU using ABPROG. Writing is also available via the internal CAN-BUS for owners of MN034

ZN030 ABPROG programmer, AVDI, and Active AMS are required!

MN033 is dedicated to resolving a problem with the “ELV Component Fault” which is preventing the vehicle from being started and driven.
This is a common fault in the Electronic Steering Lock (ESL/ELV) modules. The MN033 enables you to clear the critical error which blocks the vehicle’s electronic steering lock.
This function is performed with a direct connection to the ELV diagnostic line. It can be executed direct in the vehicle or on bench!

Supported vehicles:

• ALL FBS4 vehicles with ESL/ELV modules!

The usage of the ZN051 ABRITES Distribution Box is recommended for this license.

MN032 is a world leader in terms of Mercedes-Benz vehicles module replacement, both for new and used control units.

Functionalities:

• Set FBS4 Electronic Control Modules to virgin state
• Read the personalization data from a FBS4 Control Modules and save it to a file
• Program personalization data from a previously saved file to a FBS4 Control Module
• FBS4 Control Modules Activation
• Display FBS4 status of Control Modules including assembled in hybrid and electric vehicles
• VIN programming

Currently supported FBS4 – Control Modules:

• by OBDII – Read FBS4 data, Program FBS4 data (Personalize), set to virgin state all MED17, EDC17, SID310, Delphi-CRD3 ECUs, (CR40, CR41, CR42, CR43, CR6, CR60, CR61, MED40, MED41, MED177, MED1773, MED1775, CRR1, CRR1+, CRD3, CRD3S2). Fully supported by OBDII is also 48V started generators from family INV20EM01 (hybrid vehicles)
• by OBDII – Read FBS4 data from all MRD1, MRG1, MRG2, CRR2, EMS71 (no restrictions about production year!)
• by DSBOX and on bench connection to the unit – set to virgin state MRD1, MRG1, CRR2 produced before 2021. ZN051 Distribution box and EP003 are required.
• by DSBOX/ABProg and on bench connection to the unit – all DSM/DSM222 and transmission control units VGS-DCT (dual clutch transmission) and VGSNAG3 (9-g tronic). ZN051 Distribution box and EP003 are required.
• ECU MRD1, MRG1 (manufactured up to 2021) – Bench connection using ZN051 Distribution box and EP003 are required.
• Direct Shift Module (DSM) – ABPROG (ZN030) is required to connect to the module’s microcontroller to read and extract the needed data directly from it.

Required tools:

• ZN051 Abrites Distribution Box
• ZN030 Abrites ABPROG
• CB030 Mercedes-Benz MD1/MG1 ECU connection cable for FBS4 Manager and ECU Programming Tool
• CB403 Extended Cable Set for all TCUs which require bench connection

AVDI with active AMS is required.

VGS-NAG2 FBS4 Transmission control units are also supported for renewal.

The newly added modules include:

•    ECU CRR1 (SID307) and CRR1+(SID310) – Done completely by OBD.
•    ECU MRD1, MRG1 (manufactured up to 2021) – Bench connection using ZN051 Distribution box and EP003 are required.
•    ECU CRR2 (MD1CS006) – Bench connection using ZN051 Distribution box and EP003 are required.
•    ECU MED41 (MED17.7.7) – Bench connection using ZN051 Distribution box and EP003 are required.
•    Transmission Control Unit VGSNAG3 (9-Gear) – Bench connection using ZN051 Distribution box and EP003 are required.
•    Transmission Control Unit VGS2-FDCT (Dual Clutch Transmission)- Bench connection using ZN051 Distribution box and EP003 are required.
•    Direct Shift Module (DSM) – ABPROG (ZN030) is required to connect to the module’s microcontroller and read data directly from it to extract the data and use it with the Abrites software